A padlock that is broken is a padlock that is lost. However, the fact that a padlock will not open does not necessarily imply that the padlock is broken. There are numerous reasons why a padlock will not open, and there are solutions that do not always require the brute force burglary tactics of cutting, prying, or drilling. In some cases, you will need Locksmith Services in Wheat Ridge, but this information should allow you to do some of the work yourself.

The following are the most common reasons why a padlock won’t open:

  1. Blocked Keyway

The most common cause of a padlock keyway being blocked is a broken key in the lock. People will occasionally insert foreign objects into the keyhole in addition to the key. If objects have been forced into the recesses of the keyway, this may not be visible, but you will notice that the key will not fully insert.

  1. Jammed Shackle

If a padlock won’t open because the shackle is jammed, the key should still turn in the lock. This will not always be a full turn, but the padlock’s cylinder should rotate at least partially. If the cylinder can spin indefinitely without encountering resistance, there is most likely something else wrong with the lock (this could indicate a broken actuator). Call the Roadside Assistance Solutions in Aurora & Denver Co, in case you need help in the middle of the road.

  1. Key Won’t Turn

If a keyed padlock won’t open, there could be a problem with the key. The symptoms of a stuck shackle should be distinct from those of a non-turning key. The key will insert but have no effect on the lock. It will appear as if the incorrect key was inserted. Check the section on blocked keyways if the key is not inserted correctly.

  1. Frozen Components

All that is required to freeze to the point where a padlock will not open is freezing temperatures. The area where the lock is located should be frosty. Because the ice around it is naturally melting, the ice in the lock will do the same. In some cases, the frost may remain inside the lock for a longer period of time, but it should be melting.

  1. Rust Build Up

This is very common with antique or vintage locks. Even if there are no visible signs of excessive build-up, rust accumulation may be the cause of a padlock not opening. This is especially true if the padlock has a rust-proof stainless steel shackle and body. Certain internal elements, however, may corrode even if the exterior is unblemished.

Closing Thoughts

Don’t leave a broken padlock lying around. Remove a padlock that won’t open. This is especially true when changing the locks on a new home and needing to gain access to every room. Call us at 720.372.8577! Email us at info@bs-locksmith.com.